A Set of Blue Classic Royal Sofas-Yakwubu Furnitures Woodwork.
Red Coloured, Maxi, Lace Dress. Sizes 12, 14, 16 and 18
Red Couch Chair
Mario Star Low Pressure Regulator for 3kg,5kg, and 6kg LPG
₦7500.00
Mario Star Low Pressure Regulator for 3kg,5kg, and 6kg LPG
A low-pressure LPG regulator designed for 3kg, 5kg, and 6kg cylinders is a specific type of screw-on gas regulator primarily used for camping gas cylinders and smaller domestic setups. These are distinct from regulators used on standard 12.5kg domestic cylinders, which usually feature a push-on or different clip-on/threaded style. ,
While “Mario Star” is likely a variation or commercial branding of popular multi-star certified regulators (such as the standard 3-Star LPG low-pressure regulator), they all share standard technical mechanisms and operating principles.
Core Specifications & Features
Cylinder Compatibility: Tailored specifically for small-capacity camping gas bottles ranging from 3kg up to 6kg.
Thread Fitting: They typically feature a threaded inlet connection (commonly an M16 or 27mm variant depending on regional tank valves) designed to screw directly onto the top nozzle of the cylinder.
Pressure Reduction: It automatically scales down the volatile, high-pressure gas from inside the cylinder to a safe, steady operating output pressure (typically around 28–30 mbar) required by domestic hotplates, camping stoves, and burners.
Flow Capacity: Standard models maintain an efficient flow rate of roughly 1.0 to 1.5 kg/h, ensuring a steady flame without wasting fuel.
Material Build: Usually manufactured from high-quality zinc alloy or brass to offer structural durability while staying lightweight.
Safety and Installation Tips
Avoid Cross-Threading: The metal threads on low-pressure camping regulators are intentionally designed to be softer than the iron or steel threads of the cylinder nozzle. Always align it carefully by hand before tightening; forcing a crooked connection will destroy the regulator threads.
Rubber Washer Seal: Ensure the internal rubber ring (O-ring) seal inside the regulator’s inlet is intact before mounting to prevent high-pressure gas leaks.
Soap Test for Leaks: After installation, apply a little soapy water around the valve connection. If bubbles form when you turn the gas knob on, turn it off immediately and re-tighten.